Toshiba W-522 - Manual (Page 24)

24
1 On the SET UP screen, select
“COUNTER MEM.” using
PLAY or
STOP, and set to “ON” using
REW or FF.
2 Press PROG. to exit.
The memory-stop feature allows you to quickly return to a
counter reading of “0H00M00S” from any point on the tape.
Memory stop is automatically turned on whenever the time
counter with memory is displayed on the TV screen. This is
convenient when you want to watch a segment of the tape
repeatedly. You may also discover other useful application for
this feature.
Notes: If you are rewinding the tape and the VCR stops at
“0H00M00S M”, press REW again to continue
rewinding.
If you press the FF (fast-forward) button and the time
counter never reaches “0H00M00S M” between that
point and the end of the tape, the VCR will continue to
fastforward to the end of the tape.
Memory Stop Feature (Zero Return)
SLOW PAUSE/STILL
REC TIMER
TV VCR POWER
I.SELECT
SP/ SLP DISPLAY
TV VOL
COUNTER
PROG. CANCEL
REMAIN/ RESET COUNT
EJECT
CM SKIP
1 2 3
6 5 4
100
9 8 7
0
F F
A.SELECT
ENTER
STOP
REW
PLAY
ENTER
FF
REW
STOP
REMAIN/
COUNTER
PROG.
COUNT RESET
PLAY
DISPLAY
For W-528/W-522 only
W-528 522 422 eng (20-24) 2/28/02, 2:31 PM 24