Talk electronics – Talk electronic Cyclone User Manual
Page 5
Talk Electronics’ policy of continued research and development means that the above specification may change without
notice.
The Cyclone has been manufactured to conform with the protection requirements of the EC Council directive 89/336/EEC
relating to EMC by application of the following standards:
EN50081-1 1992 Emissions Standard
EN50082-1 1992 Immunity Standard
and also the requirements of the EC low voltage directive relating to electrical safety by application of the following standard
BSEN60065: 1994 Safety standard
For the purposes of testing the Cyclone was used with the mains cables and high quality interconnects supplied by Merlin
Cables. Compliance with the above standards can only be made if the unit is installed as per this manual and using the
correct cables.
Guarantee: 3 Years return to dealer.
To help us provide you with the most efficient service please return your guarantee card promptly. Your integrated amplifier is
guaranteed against manufacturing and component defects for a period of 3 years. The guarantee does not cover and
damage caused by accident, misuse, neglect or through incorrect installation, adjustment or repair by unauthorised
personnel or the cost of collecting the Cyclone from you and returning it to the dealer. The above does not effect your
statutory rights as a consumer. E & OE
T
ALK
E
LECTRONICS
L
TD
. U
NIT
3 I
MAGE
H
OUSE
326 M
OLESEY
R
OAD
H
ERSHAM
S
URREY
KT12 3PD E
NGLAND
T
EL
: +44 (0)1276 709966 F
AX
: +44 (0)1276 682843 E-
www.talkelectronics.com
S
PECIFICATION
C
YCLONE
1.1
C
YCLONE
2.1
Power output 20-20K 8 Ohms
70W
100W
Distortion 1KHz 10W 8Ohms
<=0.01%
<=0.008%
S/N Ratio
<= -80dB A weighted
<= -80dB A weighted
Residual noise
<= -62dB unweighted
<= -62dB unweighted
Frequency response 5-100KHz
+/- 3dB
+/- 3dB
Dimensions H.W.D in mm excluding connections
93x430x300
93x430x300
Weight
packed
8.90kg
8.90kg
un-packed
7.50kg
7.50kg
Talk Electronics