TRENDnet TEW-654TR - Manual (Page 13)

Q6:
A6:
How do I configure AP or AP Client mode on the TEW-654TR?
First, you need to assign a static IP address to your computer's network
adapter in the 192.168.10.X subnet. Since the 's default IP address
is 192.168.10.100 in AP and AP Client mode when no DHCP server is connected,
do not assign an IP address of 192.168.10.100 to your computer's network
adapter.
See the instructions below:
TEW-654TR
11
2. Click Internet Protocol Version
4(TCP/IPv4) and then click Properties.
Then click on Use the following IP
address, and make sure you assign
your network adapter an IP address in
the subnet of 192.168.10.x.
1. Go into the Control Panel, click
Network and Internet, click Network
and Sharing Center, click Manage
Network Connections and then right-
click the Local Area Connection icon
and then click Properties.
Windows Vista
1. Go into the Control Panel, double-click
the Network Connections icon and
then right-click the Local Area
Connection icon and then click
Properties.
Windows XP/2000