Maintenance and cleaning something not working, Service & spare parts – Tricity Bendix TM 220 W User Manual

Page 7

Advertising
background image

7

Important

You must disconnect the appliance from the electricity
supply, before you can carry out any cleaning or
maintenance work.

External cleaning

Use only soap and water and then dry thoroughly.

From time to time, apply a little wax furniture cream with
a soft cloth.

Important: do not use methylated spirit, diluents or
similar products.

Cleaning the door

Clean periodically the
interior part of the door to
remove any fluff.
Accurate cleaning ensures
correct drying.

Cleaning the filter

Your dryer will only function well if the filter is clean.

The filter collects all the «fluff» which accumulates
during drying and it must therefore be cleaned at the end
of each programme with a damp cloth.

The filter cannot be removed.

It is perfectly normal for fluff to accumulate in the filter
during drying. In fact, even fabrics dried in the open air
lose their fibres, but we do not notice it.

P0328

P0767

Before contacting your local Tricity Bendix
Service Centre, please make the following
checks:

The dryer does not start up

The door is open

The plug is not fitted into the wall socket

There is no electricity supply from the wall socket

The time selector dial is not set correctly

The dryer does not dry properly

The filter is clogged

Insufficient drying time

Excessive laundry load

The dryer is not correctly installed

Service & Spare Parts

In the event of your appliance requiring service, or if you
wish to purchase spare parts, please contact your local
Tricity Bendix Service Force Centre by telephoning:

0870 5 929929

Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.

For the address of your local Service Force Centre and
further information about Service Force, please visit the
website at www.serviceforce.co.uk.

Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
When you contact the Service Force Centre you will need
to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance (found on

the rating plate - see picture).

5. The purchase date

P0307

Mod. ...

Prod. No. ........

Ser. No. ............

Maintenance and Cleaning

Something Not Working

125993160.qxd 9/3/02 8:20 AM Pagina 7

Advertising