Taylor 516 - Manual (Page 5)

Battery Replacement
The thermometer operates on one CR2032 lithium battery (as
installed). If readings grow dim or irregular, the battery may need
to be replaced. To replace the battery:
1. Gently pull off the silicone backing under the base of the
thermometer head.
2. Loosen the screw located inside one of the holes in the
base/stem part of the thermometer (The screw will not come
all the way out).
3. Gently pull the base/stem part of the thermometer from the
thermometer head. Do not pull forcefully, as the wires inside
the thermometer may detach.
4. Remove the screw that secures the battery cover. Gently
remove the battery cover. (Take care not to misplace the screw.)
5. Replace the old battery with the new battery, with the “+” sign
showing.
6. Replace the battery cover (the 2 tabs opposite the screw hole
should tuck under the black plastic casing). Replace the battery
cover screw.
7. Gently push the thermometer head and base back together
until the pieces click securely in place.
8. Replace the screw in the hole under the base of the
thermometer.
9. Replace the silicone backing. The thermometer is ready for use.
Specifications
Temperature Range: 16º to 302ºF or -9º to 150ºC
Resolution: 0.1ºF or ºC full range
Timer: 9 minute 59 second countdown
7 Preprogrammed Tea Types: White, Green, Oolong, Black,
Herbal, Puerh, Darjeeling
Battery: CR2032 (included)
Auto Shut-Off: After 10 minutes of nonuse
Response Time: 1 second