Tannoy Tanoy TS Sub - Manual (Page 9)

SUB
TECHNICAl SPECIFICATION
TS801 TS1001 TS1201
Output Power 200w rms 300w rms 500w rms
low Frequency Response (-6dB) 29Hz 24Hz 21Hz
(Typical In Room)
Inputs 2 x Phono line level, 2 x speaker level
Input Filter 50-150Hz, 2nd order low Pass, with lFe Provision
Auto Mute after approximately 15 mins in absence of Input signal
Driver Type 200mm (8”) 250mm (10”) 300mm (12”)
Enclosure Type Closed Box, Forward Firing
Enclosure Volume 16 litre (0.57 cu. ft.) 23 litre (0.81 cu. ft.) 32 litre (1.13 cu. ft.)
Additional Features mode Presets: audio, Video, night
Variable Phase Control, 0-180 degrees
shelf Filter +/- 6dB range, lower limit 35Hz
Parametric Equaliser (PEQ). +/- 6bB Range, 20-100Hz,
Wide Setting (Q=6), Normal (Q=3.5), Narrow (Q=2)
Infra Red (IR) Receiver Functionality
Enclosure Dimensions, (W x H x D) 300 x 300 x 280mm 340 x 340 x 305mm 365 x 365 x 355mm
Excluding Feet 11.81 x 11.81 x 11.02” 13.39 x 13.39 x 12.00” 14.37 x 14.37 x13.98”
Enclosure Weight 9.3kg (20.5lbs) 12.1kg (26.7lbs) 16.7kg (36.8lbs)
Mains Voltage 120V Nominal AC 60Hz, 230V Nominal 50Hz (Switchable)
Maximum Power Consumption 312Va 475Va 810Va
Mains Fuse 120V-T2al 250V 120V-T3.15al 250V 120V-T6.3al 250V
230V-T1al 250V 230V-T1.6al 250V 230V-T3.15al 250V
NOTE: Tannoy adopts a policy of continuous improvement and product specification is subject to change
without notice.