The Singing Machine SMG-180 - Manual (Page 12)

CD OR CD+G OPERATION
PLAY/PAUSE MODE
To start playing, press the PLAY/PAUSE button, the first track [ ] and the PLAY/PAUSE LED
indicator will be displayed.
To temporarily stop playing, press the PLAY/PAUSE button, the PLAY/PAUSE LED Indicator
will flash.
To resume play, press this button again.
STOP MODE
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total
number of tracks will be shown in the LED window).
SKIP (FOR BOTH CD AND CDG DISCS)
During STOP mode, you can skip up or down to your desired track number by pressing a SKIP
button ( - SKIP - ).
To resume playing the selected song, press PLAY/PAUSE button.
SEARCH (FOR AUDIO CDS ONLY)
When playing audio CD, press and hold the SKIP button ( - SKIP- ), the CD will search at
high speed in the forward or backward direction. Normal play will continue when you release the
button.
REPEAT
! To repeat the track currently playing, press the REPEAT button once, the REPEAT LED
Indicator will flash.
! To repeat all tracks, press the REPEAT button twice, the REPEAT LED Indicator will stay lit.
! To clear the repeat function. Press the REPEAT button again, the REPEAT LED Indicator will
turn off.
PROGRAM
! Use this button to program and play back songs in a preselected order.
Step 1: Programming should be done in the stop mode only. Press the PROGRAM key
until the PROGRAM LED flashes, the track will read [ ].
Step 2: Press the double arrow keys ( -SKIP- ) to select a desired track.
Step 3: Press PROGRAM key to confirm entry. You can repeat the same steps up to a
maximum of 20 tracks.
Step 4: Press PLAY to activate PROGRAM.
! Press the STOP button to clear all the programmed entries.
E11
E
N
G
L
IS
H