Texas Instruments SLEU056 - Manual (Page 11)

TAS5010−5112F2EVM Features
1-3 Introduction
The TAS3002 IC from Texas Instruments is used as digital audio processor
(DAP). All features in the DAP can be controlled through the I
2 S interface.
Adjustment of the sound level can be executed through the I 2 C bus and with
two push buttons on the EVM board.
During power up, the TAS3002 settings and coefficients are loaded from an
external serial EEPROM. The TAS3002 coefficients control all features in the
DAP. Customized start up settings can be downloaded to the EEPROM. This
operation is easy to execute with a personal computer, DCT software, and a
cable between TAS5010−5112F2EVM and the computer. The
TAS5010−5112F2EVM is connected to the LPT port at the computer.