TP-Link TL-WN827N User Manual
Page 21
Wireless N USB Adapter
User Guide
TL-WN827N
- 17 -
2. Click
the
Profile tab of the utility and click the Add button on the screen that appears.
3. The Profile configuration screen will appear, please enter Test for the Profile Name, TPLINK
for the SSID, select Infrastructure for the Network Mode, select WEP for the Data Encryption
and enter 0123456789 for Network key.
4. Click
OK to save this profile.
5. Highlight the profile named Test on the profile list and click Activate on the Profile screen.
The utility will establish a connection with this AP by configured profile.
3.2 Configure with Windows XP Wireless Zero Configuration
1. Right click the icon
on the bottom of the desktop firs t a n d you will see Figure 4. Double
click the Use Zero Configuration as Configuration utility option to enable Wireless Zero
Configuration function.
Figure 3-11 Use Zero Configuration as Configuration utility
2. After that, double click the icon
, and the following Figure 3-12 will appear with some
available wireless network choices. You can highlight a network and then click Connect to
add to a network.
Figure 3-12 Choose a wireless network