Tyco Digital Security Control PC158O User Manual
Page 12
13
4. Activate each sensor in turn (e.g. open a door/window or walk in motion detector areas).
From an LED keypad, observe the zone light turn ON when the zone is activated. The zone light will
turn OFF when the system restores to normal (i.e. door or window closed).
From an LCD keypad, the following message will be displayed when each zone is activated...
Use the arrow (< >) keys to view which zone is open. This message will
disappear when the zone is restored.
6. If the panel has any fire zones, activation will cause the alarm signal to sound in a pulsed mode.
7. Disable the walk test.
From an LED keypad, enter [
✱
][6][Master Code][0]. The keypad will sound one long beep when the
walk test is disabled.
From an LCD keypad, press [
✱
] to enter the functions list. Use the arrow (< >) keys to scroll to find
“User Functions” and press [
✱
] to select. Enter your Master Code and scroll to find the following
message.
Press [
✱
] to select. The keypad sound one long beep and the display will read...
8. When testing is complete, call and advise the monitoring station.
Door Chime Feature
The door chime feature is used, while the panel is disarmed, to provide a tone from the keypad each
time a door or window is opened or closed. The doors and windows which will provide this indication
are programmed by your installer.
To activate the door chime from an LED Keypad:
Enter [✱][4] to turn the door chime feature ON and OFF. When the command is entered, the keypad
buzzer will beep 3 times if the door chime feature is enabled and will sound one long beep if it is
disabled. Press [#] to return to the Ready state.
To activate the door chime from an LCD Keypad:
Start with the panel in the disarmed mode, press [
✱
] to enter the function list, then scroll to find...
Press [
✱
] or [4] to enable or disable the Door Chime feature. Press [#] to return to
the Ready state.
Press (*) For<>
Door Chime
Walk Test
is disabled
Select Option <>
Walk Test
Secure System
Before Arming <>