9 statistics – TP-Link TL-WR642G User Manual
Page 72
TL-WR642G
108M Wireless Router User Guide
65
your browse
. You will be asked for the router's password. After
successfully entering the password, you will be able to access the router's Web-based utility.
)
Note:
Be sure to change the router's default password to a very secure password.
4.13.9 Statistics
The Statistics page (shown in Figure 4-61) displays the network traffic of each PC in LAN,
including total traffic and traffic of the last
Packets Statistic interval
seconds.
Figure 4-61 Statistics
¾
Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click
the Enable button. If disabled, the function of DoS protection in Security settings will be
ineffective.
¾
Packets Statistics Interval - The default value is 10. Select a value between 5 and 60
seconds in the pull-down list. The Packets Statistic interval indicates the time section of the
packets statistic.
¾
Sorted Rules - Here displays sort as desired.
¾
Statistics Table:
IP Address
The IP Address displayed with statistics
Packets
The total amount of packets received and transmitted by the router.
Total
Bytes
The total amount of bytes received and transmitted by the router.
Packets
The total amount of packets received and transmitted in the last Packets
Statistic interval
seconds.
Bytes
The total amount of bytes received and transmitted in the last Packets
Statistic interval
seconds.
Current
ICMP Tx
The total amount of the ICMP packets transmitted to WAN in the last
Packets Statistic interval
seconds.