Tyco ADC 660P - Manual (Page 4)

PRECAUTIONS
1. Do not attempt to disassemble the camera.
In order to prevent electric shock, do not remove screws or cover. There are
no user-serviceable parts inside.
2. Do not expose the camera to rain or moisture, or try to operate it in wet
areas.
Take immediate action if the camera becomes wet. Turn the power off and refer
servicing to qualified service personnel. Moisture can damage the camera and
also create a danger of electric shock.
3. Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In a case where the dirt is
hard to remove, use a mild detergent and wipe gently.
4. Never point the camera toward the sun.
Whether the camera is used outdoors or not, never point it toward the sun.
Use caution when operating the camera in the vicinity of spot lights or other
bright lights and light reflecting objects.
5. Do not operate the camera beyond its temperature, humidity or power source
ratings.
Do not use the camera in an extreme environment where high temperature or
high humidity exists. Use the camera under conditions where temperatures are
between 14° F~122° F (-10° C~+50° C) and humidity is below 85%.
6. Use a 24V AC / 12V DC class 2 LPS supply only.