Tripp Lite DNET1 - Manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model #: DNET1
RJ45 Network Surge Suppressor for Network/Phone Lines
Highlights
Complete Ethernet (RJ45) surge protection
Protects against the effects of electrostatic discharge, faulty wiring and
lightning
Description
Tripp Lite's DNET1 offers network ethernet line surge suppression for 100Base-T, 10Base-T, Token Ring, AS400/Sys3x and RS422 applications.
Convenient RJ45 input and output connections with included 5 inch ethernet patch cable allows convenient placement at the protected device
network connection. Surge suppression is handled with balanced arrays of high-speed avalanche diodes that divert excess energies created by
electrostatic discharges, faulty wiring or lightning away from network interface connections. Tripp Lite network surge suppressors reduce blown NIC
cards, garbled network transmissions, system lock-ups and hard equipment failure by safely shunting dataline surges to ground.
SUPPRESSION: 1 set RJ45 in/out jacks, protects wires 1-8, 7.5V clamping
Applications
Ideal for the protection of network workstations, printers and other internetworking devices with a network Ethernet connection
Ideal for NICs, terminals, hubs, MAUs, LAN equipment
Package Includes
DNET1 dataline protector
5-in. RJ45 patch cable
Warranty information and instruction manual
Features
DNET1 protects network workstations, printers and internetworking devices from surges present on 10/100Base-T, token ring, AS400/Sys3x
or RS422 network lines
Convenient RJ45 input and output connections make for simple installation (RJ45 input/output connections, pins 1-8, 7.5V clamping)
5 inch ethernet patch cable enables ideal protection placed as close as possible to the point of use
Surge suppression utilizing high speed avalanche diodes divert excess energies on the network to ground
Specifications
OVERVIEW
Intended Application Home/Office, Computer Networking