Manual paper selection – Toshiba E-STUDIO230/280 User Manual
Page 78
76
3.SETTING OF BASIC COPY MODES
1.PAPER SELECTION (Cont.)
3
Manual Paper Selection
Automatic Paper Selection cannot be used for highly transparent originals such as OHP films and tracing
paper, wholly dark originals or originals with dark borders, or irregular sized originals such as newspapers
and magazines. For these types of originals, use manual paper selection.
* When the desired size of paper is not set in any of the drawers, you can change the paper size of the
drawer ("Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses" Page 39) or
use the bypass copying ("Bypass Copying" Page 61)
1
Place paper in the drawer(s).
- "4.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying "Bypass Copying"
Page 61, be sure to specify the paper size.
2
Place the original(s).
- "1.SETTING ORIGINALS" Page 48
3
Press the drawer button representing the
desired paper size or select the paper size
with
button.
- Or press the [ZOOM...] button to enter the next screen, and press
the button of the desired paper size.
- "Setting the [OTHER SIZE] button" Page 77
z
Select other copy modes as required.
4
Press the [START] button.