Perreaux Headphone Amplifier Silhouette SXH2 - Manual (Page 6)

5
1 1 1 1 Unpacking and Placement
Unpacking
Procedure
The SXH2 is packaged for maximum protection. To open, sit the
box upright and cut the reinforced tape at the top of the box. The
product can now be removed.
Pull the foam protecting end-caps off either side of the unit and
remove the black material covering.
The SXH2 Headphone amplifier is now unpacked and ready for
further installation.
Note: Please retain all packaging material for future transport.
Box
Contents
1 x SXH2 Headphone amplifier
1 x Product manual
3 x Performance analysis charts
1 x Detachable AC power cord
Placing Your
SXH2
The SXH2 should generally be placed close to your source
equipment, thus keeping interconnect cabling between the SXH2
and associated components as short as practical. This will reduce
the systems susceptibility to radio frequency interference and the
negative effects associated with long cables.
Ventilation
Requirements
The SXH2 is a low power amplifier. Ventilation requirements
are not considered an important factor in product placement.
In the event that the SXH2 is to be incorporated into custom
cabinetry, please refer to the dimensional information provided in
the Physical Dimensions section of the manual (Chapter 12).