Getting started – Tapco THUMP TH-15A User Manual

Page 4

Advertising
background image

4

Getting Started

The following steps will help

you set up your loudspeakers

quickly.

INITIAL SETTINGS:

1. Turn the LEVEL control on the rear panel

all the way down.

. Set the DIRECT/EQ switch out (DIRECT).
3. Turn the POWER switch OFF.

CONNECTIONS:

1. Connect the line-level signal from your

mixer (or other signal source) to the

IN jack on the TH-15A rear panel (XLR

connector).

. Connect the supplied AC power cord

to the IEC socket on the back of the

loudspeaker. Plug the other end into an

AC outlet properly configured with the

correct voltage as indicated just below

the IEC socket.

TURN IT ON:

1. Turn the POWER switch ON.
. Start your signal source (tape deck, CD,

DAW, or whatever), but leave the master

level control on your mixer down.

3. Slowly turn up the LEVEL control on the

TH-15A to the “U” (unity gain) mark at the

center position.

4. Adjust the master volume on your mixer

to a comfortably loud listening level. If

the volume from the speakers gets really

loud, really fast, try turning down the

LEVEL control on the TH-15As a bit. If the

speakers don’t get loud enough, turn

up the LEVEL control to achieve a good

balance of master volume control and

loudness from the speaker.

Now that you have your loudspeakers

working, it’s time to hunker down and read

the rest of this manual…especially the

following:

ADDITIONAL TIDBITS OF WIDSDOM:

• Never listen to loud music for prolonged

periods. Please see the Safety Instructions

on page 2 for information on hearing

protection.

• When you shut down your equipment,

turn off the TH-15A loudspeakers first

to prevent thumps and other noises

generated by any upstream equipment

from coming out the speakers. When

powering up, turn on the TH-15As last.

• Save the shipping boxes and packing

materials! You may need them someday.

Besides, your cat will love playing in them

and jumping out at you unexpectedly.

Remember to pretend like you are

surprised!

• Save your sales receipt in a safe place.
• Record the serial number in the space

provided on page 3, along with where

and when you bought it.

Advertising