Technicolor - Thomson 5400LDK - Manual (Page 14)

2-4 Operator's Manual LDK 5400 - Triax Adapter for LDK 100 Series Assembling the Units
1.5-inch Viewfinder
Mounting the 1.5-inch viewfinder and microphone holder
To mount the 1.5-inch viewfinder proceed as follows:
a. Loosen locking ring
1
of viewfinder support bracket
2 at the front of the camera handle. (As seen from
the rear of the camera, turning the locking ring
counterclockwise moves it towards the handle.)
b. Slide the viewfinder onto the viewfinder support
bracket.
c. Tighten the locking ring
1
by turning it clockwise
(as seen from rear) so that the viewfinder is
mounted securely to the support.
d. Connect the viewfinder cable to the viewfinder
connector socket
3
at the top right of the camera.
e. Slide the microphone holder
4
onto the viewfinder
and secure with the knurled screw 5 .
Caution
Always fit the microphone holder
4
as it functions
as a safety stop for the viewfinder.
f. To improve the comfort of the skin contact when
using the viewfinder, fit the soft cover to the rubber
eyepiece.
1
2
3
4
5