Cd or cd+g operation – The Singing Machine STVG-707 User Manual

Page 12

Advertising
background image

CD OR CD+G OPERATION

PREPARATION

!

This unit is designed to play CD’s bearing the identification logo "

"

. If CD’s do not

conform to the CD standard, they may not play properly.

!

Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion
from the center of the disc to the outside edge.

!

Never use chemicals, such as record cleaning sprays, antistatic sprays or fluids, benzene or
thinner to clean compact discs. These chemicals will permanently damage the plastic
surface of the disc.

!

Always place the compact disc on the disc tray with the label facing upward. Compact discs
can be played on only one side.

!

To remove a disc from its storage case, press down on the center of the case and lift the disc
out, holding it carefully by the edges.

!

Discs should be returned to their cases after use to protect them from dust and scratches.

!

To prevent warping the disc, do not expose it to direct sunlight, high humidity or high
temperatures for extended periods of time.

!

Do not apply paper or write anything on either side of the disc. The inks used in some felt-tips
pens may damage the surfaces of the disc.

PLAYING CD OR CD+G DISC
Reminders:

!

Adjust MASTER VOLUME control on your STVG-707, TV or audio system to a comfortable
level.

!

Adjust MIC/ECHO/BALANCE controls as needed to achieve the desired mix of music and
vocals through your TV or sound system.

!

Never place anything except a compact disc on the disc tray. Foreign objects can damage
the unit.

!

Only place one disc on the disc tray at a time.

TURNING POWER ON/OFF

!

To turn on the Karaoke center, press the ON/OFF button, the ON/OFF LED will light up.

!

To turn off the system, press the ON/OFF button again, the ON/OFF LED will turn off.

(Refer to the Trouble Shooting Guide on page E17 if a disc is loaded but the total tracks
do not appear.)

FUNCTION SELECT
Set the FUNCTION Selector to CD+G.

LOADING A DISC

!

Press the

OPEN/CLOSE button to open the CD compartment. Place a disc on the

compartment with the printing side facing upward and the shiny side facing down.

!

Press the OPEN/CLOSE button again to close the CD compartment. The LED window will
display total number of tracks. (If no disc is loaded, it will display “

”).

E11

ENGLISH

Advertising