Appendix a: glossary – TP-Link TL-WN322G User Manual

Page 35

Advertising
background image

TL-WN322G

54M Wireless USB Adapter User Guide

Appendix A: Glossary

¾ IEEE 802.11b - The IEEE 802.11b standard specifies a wireless networking at 11 Mbps

using direct-sequence spread-spectrum (DSSS) technology and operating in the

unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. IEEE 802.11b

networks are also referred to as Wi-Fi networks.

¾ IEEE 802.11g - Specification for wireless networking at 54 Mbps using direct-sequence

spread-spectrum (DSSS) technology, using OFDM modulation and operating in the

unlicensed radio spectrum at 2.4GHz, and backward compatibility with IEEE 8021b

devices, and WEP encryption for security.

¾ Ad-hoc Network - An ad-hoc network is a group of computers, each with a wireless

adapter, connected as an independent IEEE 802.11 wireless LAN. Ad-hoc wireless

computers operate on a peer-to-peer basis, communicating directly with each other

without the use of an access point. Ad-hoc mode is also referred to as an Independent

Basic Service Set (IBSS) or as peer-to-peer mode, and is useful at a departmental

scale or SOHO operation.

¾ Infrastructure Network - An infrastructure network is a group of computers or other

devices, each with a wireless adapter, connected as an IEEE 802.11 wireless LAN. In

infrastructure mode, the wireless devices communicate with each other and to a wired

network by first going through an access point. An infrastructure wireless network

connected to a wired network is referred to as a Basic Service Set (BSS). A set of two or

more BSS in a single network is referred to as an Extended Service Set (ESS).

Infrastructure mode is useful at a corporation scale, or when it is necessary to connect

the wired and wireless networks.

¾ SSID - A Service Set Identification is a thirty-two character (maximum) alphanumeric

key identifying a wireless local area network. For the wireless devices in a network to

communicate with each other, all devices must be configured with the same SSID. This

is typically the configuration parameter for a wireless PC card. It corresponds to the

ESSID in the wireless Access Point and to the wireless network name.

¾ WEP (Wired Equivalent Privacy) - A data privacy mechanism based on a 64 bit or 128

bit or 256 bit shared key algorithm, as described in the IEEE 802.11g standard.

¾ Wi-Fi - A trade name for the IEEE 802.11b wireless networking standard, given by the

Wireless Ethernet Compatibility Alliance (WECA, see http://www.wi-fi.net), an industry

standards group promoting interoperability among IEEE 802.11b devices.

¾ WLAN (Wireless Local Area Network) - A group of computers and associated devices

communicate with each other wirelessly, which network serving users are limited in a

local area.

¾ WPA (Wi-Fi Protected Access) - A wireless security protocol use TKIP (Temporal Key

Integrity Protocol) encryption, which can be used in conjunction with a RADIUS server.

¾ AP- Access Point

- 30 -

Advertising