Physical details, Front-mounted leds – TRENDnet TW100 BRF114 User Manual
Page 8
TW100-BRF114 User’s Guide
Physical Details
Front-mounted LEDs
Figure 2: Front Panel
Power
(Green)
On - Power on.
Off - No power.
Status
(Red)
On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up.
LAN
For each port, there are 2 LEDs
• Link/Act (Green)
• On - Corresponding LAN (hub) port is active.
• Off - No active connection on the corresponding LAN (hub) port.
• Flashing - Data is being transmitted or received via the corres-
ponding LAN (hub) port.
• 100 (Yellow)
• On - Corresponding LAN (hub) port is using 100BaseT.
• Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
WAN
(Green)
On - Connection to the modem attached to the WAN (Internet) port is
established.
Flashing - Data is being transmitted or received via the WAN port.
4