Tyan Computer GX21 - Manual (Page 98)

90
Please note that the BIOS will automatically reset it to the
default setting of Disabled after reconfiguring the new ESCD.
So, there is no need for you to manually disable this feature
after rebooting. The choices are:
Enabled / Disabled
Resources Controlled By
When this option is set to AUTO, the BIOS by using ESCD,
controls the IRQ and DMA assignments of all of the boot and
PNP devices in the system. If you set this option to Manual,
you will be able to manually assign all IRQ and DMA informa-
tion.The choices are:
Manual / Auto (ESCD)
PCI / VGA Palette Snoop
This option is only useful if you use an MPEG card or an add-
on card that makes use of the graphics card's Feature Con-
nector. When enabled, it corrects incorrect color reproduction
by "snooping" into the graphics card's framebuffer memory
and modifying (synchronizing) the information delivered from
the graphics card's Feature Connector to the MPEG or add-
on card. It will also solve the problem of display inversion to a
black screen after using the MPEG card. The choices are:
Enabled / Disabled
PCI 1 INT Assignment
This setting defines the IRQ for the 1st PCI device. The pos-
sible values are:
Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15
CNR LAN INT Assignment
This setting defines the IRQ for the CNR LAN device. The possible val-
ues are:
Auto / 3 / 4 / 5 / 7 / 8 /11 / 12 /14 /15