Personalisation – Topcom Butler 3501 User Manual
Page 12
12
Topcom Butler B3500/3501 Multi Handset
Topcom Butler B3500/3501 Multi Handset
4. PERSONALISATION
4.1 ADJUSTING THE RING VOLUME
4.1.1 Handset ringvolume External/internal calls
The handset ringvolume for internal or external calls can be set separately:
1.
Enter the menu by pressing
/OK
2.
Select HANDSET using the up
and down
keys
3.
Press OK
4.
Select INT RING VOL or EXT RING VOL using the up
and down
keys
5.
Press OK
6.
Select the desired volume (OFF or 1 to 3 )
7.
Press OK to confirm or
to return to the previous menu.
4.2 CHOOSING THE RING MELODY
The handsets can ring with a different melody according to whether the call is internal or external.
4.2.1 Handset melody, external call
1.
Enter the menu by pressing
/OK
2.
Select HANDSET using the up
and down
keys
3.
Press OK
4.
Select EXT MELODY using the up
and down
keys
5.
Press OK
6.
Select the melody of your choice ( 1 to 3 ) using the up
and down
keys
7.
Press OK to confirm or
to return to the previous menu.
4.2.2 Handset melody, internal call
1.
Enter the menu by pressing
/OK
2.
Select HANDSET using the up
and down
keys
3.
Press OK
4.
Select INT MELODY using the up
and down
keys
5.
Press OK
6.
Select the melody of your choice ( 1 to 3 ) using the up
and down
keys
7.
Press OK to confirm or
to return to the previous menu.
4.3 SPEAKER VOLUME DURING CALL
During conversation, press the up
or down
key to change the volume accordingly.
Note: The handsfree volume is also adjust together with the receiver in the handset as above described
(only B3501).
4.4 ACTIVATION / DEACTIVATION OF BEEPS
The handsets can emit beeptone when a key is pressed, when the batteries are low or when the handset is out of range.
4.4.1 Key pressed beeptone on/off
1.
Enter the menu by pressing
/OK
2.
Select HANDSET using the up
and down
keys
3.
Press OK
4.
Select BEEP using the up
and down
keys
5.
Press OK
6.
Select KEYTONE using the up
and down
keys
Note: Every programmation is confirmed at the end by a double or single long beep. A double bleep
confirms the validation of your choice
A long bleep signifies that the modification has not been taken into account.
B3500_C.book Page 12 Monday, November 24, 2003 5:13 PM