TERK Technologies TV44 - Manual (Page 8)

7
Connecting the TV44
( co n t i n u e d )
B - Triple LNB (Phase3) Satellite Dish
1. Remove the LNB from the arm of the satellite dish to expose
the satellite cables. See Fig 10.
2. Disconnect the satellite cable(s) from the satellite dish’s LNB
and pull them out through the bottom of the satellite dish arm.
See Fig 10.
3. Connect the satellite cables to the terminals marked
OUT 1, OUT 2, OUT 3, and OUT 4 on the TV44 antenna. See Fig 11.
Fig 10.
Fig 11.
Logo Side
Dish Side
T4-0048-TV44-OM.qxp 4/28/04 11:31 AM Page 7