Top Innovations SF-465 - Manual (Page 10)

U
SING YOUR
Q
UICK
S
TEAM TM
P
ROFESSIONAL
WARNING: Always unplug unit from electrical outlet before
filling or emptying Water Tank.
10
1. Fill Water Tank with cool water. To prolong the lifetime of your
QuickSteam
TM
Professional, we recommend using distilled or de-mineralized
water.
2. Plug unit into a properly grounded three-pronged electrical outlet, and set
Lighted On/Off Switch to “On” position. Verify that light on switch is
illuminated.
3. Hold Steam Nozzle over object that you desire to steam. Press Steam
Trigger. Steam should begin flowing from Steam Nozzle in approximately 45
seconds.
4. When finished using QuickSteam
TM Professional, set Lighted On/Off Switch
to the “Off” position.
NOTE: It is normal for steam to flow from the Steam Nozzle for a period
of time after the unit is turned off. This occurs because the Steam Trigger
allows water to flow into the unit’s boiler. Once you release the Steam
Trigger, the remaining water in the boiler will continue to flow from the
Steam Nozzle for a period of time until the boiler is empty.
AUTO SHUT-OFF
The QuickSteam TM Professional is equipped with an Auto Shut-Off feature. This
protects the unit from damage that can occur from operating with a dry Water
Tank. If the water level inside the Water Tank drops below the Water Fill Line
(which can be found inside the Water Tank), the unit will automatically shut
down and cannot be restarted until water is added and level exceeds the Water
Fill Line.