Pulse function, Hot ingredients, Operating instructions – Toastmaster TMR22RCAN User Manual

Page 8

Advertising
background image

7.

6.

5. Plug the power cord into a 120V AC electrical outlet. Press

the ON Button. Blend until ingredients have reached desired
consistency.

CAUTION: If Blending Jar rotates during blending, immediately

press and release the OFF/PULSE Button, then make sure that

the Blending Jar is in the locked position as described in the

Blender Assembly Instructions.

Do not touch Blades

Do not interfere with the Blade movement

Do not remove Blending Jar Lid

6.

When blending is completed, press and release the OFF/PULSE
Button to stop the Blender and unplug the unit.

Pulse Function

To activate PULSE function press and hold down the OFF/PULSE
Button (see Figure 2). Release Button to cease function and
stop Blender.

NOTE: When using PULSE Function to crush ice, add 1 tablespoon
of water for every 5 ice cubes. Do not try to crush more than 5 ice
cubes at a time.

Hot Ingredients

CAUTION: Use extreme caution when blending hot liquids to avoid

accidental scalding or burns. Do not use your hand to cover opening!

NOTE: When processing hot foods, always remove the Cap from the
Blending Jar Lid before beginning.

Personal Blender Use and Care Guide

Operating Instructions

CAUTION: Keep hands and utensils out of the Blending Jar while

blending to prevent the possibility of severe injury to persons or

damage to the unit. A scraper may be used but must only be used

when the unit is not running.

CAUTION: Use extreme care when handling the Blender Blade.

Do not touch Blades with your fingers. The Blades are very sharp and

can cause injury if touched.

1. Before starting, make sure power cord is unplugged and press

and release the OFF/PULSE Button(see Figure 2).

2. Make sure that the Blending Jar is securely fastened to the Motor

Housing. See Assembly Instructions for details.

3. Add ingredients to the Blending Jar.

NOTE: Do not fill the Blending Jar more than 3/4 full (22-oz.)
Never operate when the Blending Jar is empty.

4. Place Blending Jar Lid with Cap on Blending Jar.

Remember: Always hold Lid in place during processing.

Figure 2

OFF/
PULSE
button

ON button

TMR22RCAN Manual 8/17/05 2:36 PM Page 6

Advertising