Xplorer 870, Adsl router leds – Topcom Xplorer 870 User Manual
Page 73
Xplorer 870
73
73
73
73
73
73
73
73
73
73
73
73
73
1. ADSL ROUTER LEDS
LED
Description
PWR
The power LED is on when power is applied to the ADSL Router. Check
your power adapter connection if the LED is off.
ALM
ALM LED will be on when error occurs; it stays off otherwise.
LLK
LAN Link LED. It is on when there is an Ethernet connection; otherwise, it
is off when the Ethernet cable is not connected.
LAC
LAN Activity LED. It blinks when there is Ethernet traffic passing through
ADSL Router; otherwise, it is off.
WLK
WAN Link LED. It is on when there is an ADSL connection; otherwise, it is
off when the ADSL cable is not connected or the ADSL connection fails.
WAC
WAN Activity LED. It will blink when there is ADSL traffic passing through
ADSL Router; otherwise, it is off when ADSL link is down.
Note: All LED's are on for approximately 30 seconds when you power on or reboot the ADSL
Router.
HANDL. XPL 870 scan 5/3/02 8:36 am Page 73