Top Innovations SF-777 - Manual (Page 15)

15
Before Calling for Service
Machine does * Machine is unplugged or not turned on.
Not operate * There is no power to the outlet. Possibly a circuit
Breaker tripped or ground fault interrupt outlet tripped
To prevent shock.
* Power went out.
Pump is * turn the machine off, wait a few minutes and restart.
very noisy There is some noise while the pump is activated or
Steam is flowing.
Pump stops * The pump is only activated while the Steam Button is
after start- depressed. Allow a few seconds from the time the
pump is engaged for steam to appear from the
soleplate of the iron.
* If the machine fails to pump water, discontinue use
Turn it off and contact the service center.
Steam does * Check the water reservoir. If it is empty you will need
not flow to refill it.
* Deposits may have clogged the holes in the soleplate.
Follow the instructions for cleaning the soleplate before
Discontinuing use.
* Listen for the water pump to engage. If it fails, turn the
machine off. Allow the iron to cool completely before
restarting. If the machine fails to restart, discontinue
use. Turn it off and contact the service center.
Iron fails * The heating plate inside the iron may be damaged or
To heat the temperature control dial has failed. Turn the iron
Off and allow it to cool completely. Contact the service
Center.