Technika TESCO BB-210CE - Manual (Page 11)

9
PROGRAM PLAY
You can store a program selection of up to 20 tracks from a CD
or 99 tracks from an MP3/WMA compilation to play in your
preferred sequence.
To set a program:
Load a CD or MP3/WMA compilation and wait for it to •
read.
Play will begin automatically.
Press the • STOP button to stop playback (programming is
only possible when stopped).
Press the
• MODE button.
The display will show the PROG symbol and P01 flashing (the
position of this track in the program).
If you are playing a MP3/WMA compilation of albums, •
you can optionally change the album number to program
by pressing the ALBUM button repeatedly (skip this step
if you are programming a CD).
Select the track number you want to program by pressing •
the SKIP+ or SKIP- button.
To save this track into the program sequence, press the •
MODE button.
The display will show 02 flashing, indicating that you are now
entering the second track in the program sequence.
Repeat the previous two steps (three steps if you want to •
change album) until you have stored all the tracks in the
program sequence.
Playing the program:
Press the • PLAY/PAUSE button to start the program
playing.
The PROG symbol will remain on and the program will begin
to play.
Selecting tracks:
You can navigate through the tracks stored in the •
program by pressing the SKIP+ or SKIP- button.
Clearing the program:
Press the • STOP button twice.
The PROG symbol will switch off.