TeleType Company 3100 - Manual (Page 12)

© 2007 TeleType Co.
WorldNav 3100
10
1.5 Quick Start Method
1. Plug in the WorldNav 3100 to the 12v car power
lighter in your vehicle. In order to charge the unit
while driving, plug the power cord into the hole on
the bottom right side of the GPS. The GPS will
charge when your car is on. If the WorldNav does
not turn on immediately, press the Reset button
located on the back of the GPS. The reset button
will not erase any of your saved history or points.
2. Your WorldNav includes a pre-configured Secure
Digital card with maps and points of interest
pre-installed. The card has already been inserted
into the GPS. Removing the card will result in the
GPS becoming non-operational. If in addition you
have purchased an expansion SD Card, to insert
your Secure Digital Card in the side of the GPS,
make sure the metal connection points on the
card match with those visible inside the device. To
remove the card press down on the card, it will
pop up and you can then remove the card from
the slot.
Secure Digital Card
3. Attach your GPS system to the windshield by
putting the suction cup on the window (moisten
cup if necessary) and then by using the flip button
next to the suction cup to achieve suction. Rest
the GPS on the dash to help stabilize it against