Turbosound TQ-440SP - Manual (Page 13)

user manual
QLight    series
TQ-440SP manual
page 13
The universal FB The universal FB The universal FB The universal FB----12 flybar assembly 12 flybar assembly 12 flybar assembly 12 flybar assembly enables the use of
several different fixing methods, shown in the diagram here.
The flybar is attached to to the cabinet using a pair of captive
M10 shoulder eyebolts (supplied). There are 12 attachment
points equally spaced along the length of the spine.
Depending on which point is chosen for the given attachment
system, a wide range of downward inclination can be achieved
over a range of approximately 70 degrees. The design of the
flybar even allows for upwards angles, for example for
coverage of balconies that are higher than the loudspeaker
location.
The FB-12 flybar assembly comes supplied with a U U U U----6 Unilock 6 Unilock 6 Unilock 6 Unilock which provides a single attachment
point. The point at which the Unilock is attached to the flybar determines the vertical angle of the
loudspeaker as shown in the table following.
A PP PP PP PP----440 pic 440 pic 440 pic 440 pickkkk----up point adaptor up point adaptor up point adaptor up point adaptor offers a further single attachment point. This option provides fast
adjustment of vertical angle. The point at which the eyebolt adaptor is attached to the flybar
determines the vertical angle of the loudspeaker as shown in the table following.
The SC The SC The SC The SC----440 aluminium scaffold clamp adaptor 440 aluminium scaffold clamp adaptor 440 aluminium scaffold clamp adaptor 440 aluminium scaffold clamp adaptor is attached to the T-bar by means of a simple
clevis coupler. It is designed to rotate horizontally through 360 ° in order to enable accurate