Troubleshooting, Device not working, Verifying devices are installed – Targus ACP60 User Manual

Page 18

Advertising
background image

Troubleshooting

Device Not Working

• Make sure that the device is fully inserted into the correct port on the
docking station.

• Plug the device into a different port on the docking station. If it still
doesn’t work, test the device by connecting it directly to your
computer.

• Verify that you ran the Setup or Install program for the device.

• Make sure that the device appears in Device Manager. For more
information refer to “Verifying Devices are Installed”.

• Disconnect all devices from the docking station and reconnect them,
one at a time. Check that each device works before plugging in the
next one.

• Each USB port is equipped with over-current protection. Should a
USB device draw more current than the USB port can supply, the port
will shut down. To re-enable the port, unplug the device and go to
Device Manager or to the message in the system tray and choose the

Reset option. You can then plug the device back into the USB port. If

a shut down reoccurs, check the power requirements of the device.

Verifying Devices are Installed

You can view the devices installed on the docking station from the
Device Manager window in System Properties.

Right-click

My Computer, Properties, then click the Hardware tab,

and then the

Device Manager button.

Targus ExpressCard Notebook Docking Station with Digital Video and Audio

17

Advertising