Thiel Audio Products PowerPoint 1.2 - Manual (Page 4)

BREAK-IN
The PowerPoint 1.2, like most speakers, requires a period of playing before they perform optimally. The time depends on how
loudly the speakers are played; more time is required if played softly, less if played loudly. At least 50 hours at moderately loud
levels are required before the speaker is performing near optimum.
GRILLE
The PowerPoint 1.2’s grille is magnetically attached to the cabinet and can be removed by gently prying the grille forward and
away from the cabinet.
PAINTING THE CABINET
The PowerPoint 1.2 is shipped with an off-white finish. The speaker can be painted any
desired color. To paint the speaker, first remove the grille and insert the included
painting mask to protect the driver. The rim of the mask is tucked between the black
rubber woofer surround and the white plastic rim of the cabinet’s driver opening. Also,
peel the cloth from the back of the grille before painting its front surface. After the
paint is dry, reinstall the grille’s rear cloth and the grille onto the cabinet.
Painting mask installed SERVICE
If your speaker system requires service, contact your authorized THIEL dealer. If you
need to contact THIEL, service information and technical support is available at (859)
254-9427, Monday-Friday, 8:30 a.m. - 5:00 p.m. Eastern Time, or via e-mail at [email protected].
THIEL POWERPOINT 1.2 SPECIFICATIONS
Amplitude Response 75 Hz-20 kHz
±
3 dB
Phase Response Minimum
±
10
°
Sensitivity 89 [email protected] V-1m
Impedance 4 ohms (3 ohms minimum)
Recommended Power 30-200 watts
Size 12 " W x 6.5" D x 21" L (horizontally oriented)
Weight 10 pounds