TOA Electronics ALARM INPUT UNIT C-AL80(H) - Manual (Page 5)

5
1 2
3 4
Cover
The inside of
the cover
ON
OFF
POWER
ON
OFF
UNIT No.
LEVEL
REMOTE OFF
ABBREVIATION No.9001
REMOTE
ALARM
ABBREVIATION No.1
REMOTE ON
EDGE
1 2 3 4 1 2 3 4
(1) Power Switch [ON/OFF ]
Used to turn power on and off.
(2) Power Indicator
Lights when the Power switch is set to ON.
(3) Unit No. Setting Switch [ON/OFF]
Used to set the unit number when performing
master/slave connections (cascade connections) for
multiple C-AL80 units. Up to 8 units can be
connected for the "Master/Slave" relations. (Refer to
p. 19; Master/Slave Connections.)
(4) Mode Selection Switch [Alarm/Remote,
Abbreviation No. 1–/Abbreviation No. 9001–,
Remote ON/Remote OFF, Edge/Level]
(From left to right)
1) Switches the rear panel-mounted terminal block
input between "Alarm" and "Remote" mode.
2) It cannot be used.
3) It cannot be used.
4) Switches the alarm interval between "Edge" and
"Level."
For more information on, refer to p. 9; Mode
Selection Switch Setting.
4. NOMENCLATURE AND FUNCTIONS
[Front Panel]