Topfield High Defninition Digital Satellite Receiver HV7700 HSCI - Manual (Page 39)

4.3 Resetting to factory settings 33
4.3 Resetting to factory settings
The digital receiver maintains the following data:
• Satellite list
• Services list
• Favourite list
• Timer list
• Preference settings
You can reset all data of the digital receiver. If you want to re-
set all the data, select the Installation > Factory Setting menu,
then you will be asked for confirmation. If you select Yes,
service entries, favourite entries and timer events will all be
deleted, and preference options will be reset to the manufac-
turer’s factory settings.
4.4 Resetting to installer settings
You can store your own data including the following:
• Satellite list
• Services list
• Favourite list
• Preference settings
Also you can restore them at any time.
To store your data, select the Installation > System Recovery
menu and select the Store option; then the digital receiver will
ask your personal identification number. The number may be
different from yours because this function is usually permitted
only to installers. If you have entered a right number, you
will be asekd for confirmation. If you select Yes, your data
will be stored. Whenever you store your data, they are all
overwritten. Refer personal identification number to §
3.4 .
To restore your data, select the Installation > System Recovery
menu and select the Recover option; then you will be asekd