Introduction – Telex BP-1002 User Manual

Page 5

Advertising
background image

Introduction 1

CHAPTER 1

Introduction

WARNING:

If you have a BP-1002/2002 with a 9030-7740-XXX circuit board,

you will need to obtain Revision H of this user manual.

The Audiocom

®1

BP-1002 and BP-2002 are microprocessor controlled one- and

two-channel intercom beltpacks. An internal switch and jumper setting allows the

units to be used with Clear-Com

®2

components, if desired. Other internal switch and

jumper settings allow the unit to be uniquely configured to the operator’s
requirements.

1. Audiocom

®

is a registered trademark of Telex Communications, Inc., Burnsville, MN

55337.

2. Clear-Com

®

is a registered trademark of Clear-Com Intercom Systems.

Advertising
This manual is related to the following products: