Tonka Playskool - Manual (Page 2)

ASSEMBLY
Basic
Attach rear axle
assembly to truck body
with the 2 screws.
Push Mode
1. Make sure seat
is locked in the
“down” position.
2. Make sure gravel
guard is locked
in the “down”
position.
Walk Mode
2. Attach seat in the
“up” position. Push
down until the
buttons click to
lock seat in place.
1. Remove seat by
pressing both
buttons at the
same time and
lifting the seat up.
Ride-on Mode
3. Remove gravel guard by pushing
both buttons at the same time
and lifting the gravel guard up.
1. Remove seat by
pressing both buttons
at the same time and
lifting the seat off the
truck body.
2. Attach seat in the
“down” position. Push
down until the buttons
click to lock seat
in place.
NOTE: Seat must be in “down” position for child to ride on
vehicle. Never allow child to sit or ride on gravel guard.
4. Attach the gravel guard
in the “up” position by
pushing both buttons
at the same time and
inserting guard vertically
into slot, then pushing
down on the gravel guard
until buttons click and
guard is locked in place.