Toshiba SG-1991 - Manual (Page 23)

BASIC OPERATION
23
Basics
INTERCOM
You can use the INTERCOM to have a 2-way conversation between
the base unit and handset without tying up the phone line. Or you can
use it as a handset locator.
INTERCOM FROM HANDSET TO BASE:
1
Press button. The HANDSET
and BASE beeps.
The LCD displays the following message:
2
Press or button to answer
on the base unit.
3
Begin speaking.
4
When you finish, press button on the handset or
button on the base unit.
NOTE:
If you press button on the handset while the base unit is
being used for talking on an outside line, the handset produces a busy tone
and the intercom is disabled.
INTERCOM FROM BASE TO HANDSET:
1
Press button. The HANDSET and
BASE beep.
The LCD displays the following message:
2
Press or button to
answer on the handset.
The LCD displays the following message:
3
Begin speaking.
4
When you finish, press button on the base unit or
button on the handset.
NOTES:
• The button on the base unit is disabled while the handset is used for
talking on an outside line.
INTCOM
TALK SPEAKER
DELETE/INTCOM TALK
INTCOM
DELETE/INTCOM
SPEAKER TALK
INTCOM SPEAKER
DELETE/INTCOM
Paging Base
Intercom
Paging
Intercom
SG-1991.qxd 7/4/1 7:29 PM Page 23