Before first use, How to use – Toastess Intelligent Countdown tt-522 User Manual

Page 5

Advertising
background image

BEFORE FIRST USE

1. Remove all packaging.
2. Read all instructions carefully and keep them for future reference.
3. Make sure that the Crumb Trays are in place.
4. Plug the power cord into a 120 V AC wall outlet. Operate the

toaster once or twice without bread on the highest browning level
to burn off any residue left from the manufacturing process. Any
smoke or smells produced during this procedure are normal.

HOW TO USE

Cancel Function:

Interrupts the toasting cycle

Defrost Function:

First defrosts frozen bread then toasts

Reheat Function:

Reheats previously toasted bread, bagels, etc.
without further browning

Toast Function:

Browns both sides of the bread

Bagel Function:

Warms the outside crust and browns the cut
side of the bagel, English muffin, etc.

1. Plug power cord into a 120V AC wall outlet.
2. Select the degree of browning on the Browning Control Knob.

Light – setting 1 or 2
Medium – setting 3 or 4
Dark – setting 5

3. NOTE: If the toaster is not plugged in, the carriage control

lever will not lock.

Toasting (both sides)
1. Slide the Bagel/Toast Control to the right (Toast).
2. Place slices of bread, waffles, etc. into the bread slots. The bread

guides will adjust automatically to hold thinner slices.

3. Select the desired setting on the Browning Control Knob.
4. Push the Carriage Control Lever down until it locks. The Cancel

light will come on. If you wish to raise the Carriage Control Lever
before the end of the toasting cycle, press the Cancel button.

5. When the toasting cycle is complete, the Carriage Control

Lever will pop-up automatically.

5

Booklet_TT-522_ENG.qxd:Salton Booklet 6/18/09 2:06 PM Page 5

Advertising