7managing multiple handsets, 3 searching a handset from the base, 1 setting up an additional handset – Topcom BUTLER 4200 User Manual
Page 22
22
Topcom Butler 4200/Twin/Triple/Quattro
Topcom Butler 4200/Twin/Triple/Quattro
6.1.3 Delete an entry
1.
Enter the menu by pressing
2.
Select PHONE BOOK using up
and down
keys
3.
Press
4.
Select DELETE using up
and down
keys
5.
Press
6.
Move through the name list using up
and down
keys, the list scrolls in
alphabetical order
7.
Press
to confirm when you find the name you want to delete or press Cancel C
key to stop
6.1.4 Delete all entries
1.
Enter the menu by pressing
2.
Select PHONE BOOK using up
and down
keys
3.
Press
4.
Select DELETE ALL using up
and down
keys
5.
Press
6.
Press
to confirm when ‘CONFIRM?’ appears or press Cancel C key to stop
6.2
Setup prefix memory
1.
Enter the menu by pressing
2.
Select HANDSET using up
and down
keys
3.
Press
4.
Select PREFIX MEM using up
and down
keys
5.
Press
6.
Enter the prefix number or press Delete C key to delete
7.
Press
to validate
6.3
Searching a handset from the base
When Paging button
on the base is pressed, all the registered handsets will ring. This
ringing will help you locate a lost handset. By pressing Paging button
again or pressing
one of the handset keys, the ringing stops.
7
Managing multiple handsets
7.1
Setting up an additional handset
You can register new handsets on the base if these handsets support the DECT GAP profile.
The base can support a maximum of 4 handsets. If you already have 4 handsets, and you
want to add another one or change one handset, you must first remove a handset, then
associate the new handset.
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK