Tripp Lite B022-002-KT-R - Manual (Page 9)

9
5. Operation
(continued)
Activate Hotkey mode using the [Num Lock] + [*]; or [Num Lock] + [-]
Hotkey command. Once Hotkey mode is activated, hit the keys in the table
below to perform the corrsponding action.
Combination Function
[Port ID Number] Switches the KVM selection to the
computer that corresponds to that Port ID.
[A] Activates Auto Scan Mode
[ ] Switches the KVM selection from the
current port to the previous port.
[ ] Switches the KVM selection from the
current port to the next port.
[Esc] or [Spacebar] Exits Hot Key, Auto Scan, and Skip Modes.
LED Off Port is not selected
LED On (Steady) Port is selected
LED Flashing Port has been selected in Auto Scan mode
5.5 Hotkey Summary Table (for B022-004-R only)
5.6 LED Display