Toshiba W-412 - Manual (Page 15)

15
PREP
ARA
TION
8 Press ENTER to start the “AUTO” clock
set feature.
After the VCR is turned off, it automatically
updates the clock using the data broadcast
by the local TV stations.
*
The clock is
revised by
broadcasting
signal at 8:00 A.M
every morning.
9 Select the options using FF or REW.
Change the data using PLAY or STOP.
1) Set “SUMMER TIME
(Daylight-Saving Time)”.
DST start: Daylight-saving time begins on
the first Sunday in April. Because the
clock automatically changes from 2:00 AM
to 3:00 AM (forward one hour).
DST end: Daylight-saving time ends on
the last Sunday in October. The VCR
clock automatically changes from 2:00 AM
to 1:00 AM (back one hour).
remember that any part of a scheduled
Timer Recording that falls between these
two times will not be recorded.
AUTO: the VCR is using the clock data
Broadcast by the local TV stations.
IN: You want to use the DST function, and
you are leaving in the area that apply
Daylight-saving time.
OUT: You are not leaving in the area that
apply Daylight-saving time and you do not
want to use DST function.
2) Set “TIME ZONE”.
If you select “AUTO” for your time zone,
the VCR sets the clock using the first
Coordinated Universal Time information it
finds. If the time is not correct, select
another time zone or use the “MANU”
option.
3) Set “CLOCK DATA CH”.
If you don't know the clock data channel,
select “AUTO”. The VCR will scan
automatically to tune the channel carrying
the clock data.
If AUTO CLOCK SET is unsuccessful, set the
time and date through the “MANU” clock
set menu selection.
10 Press PROG..
Now the clock starts.
Setting the Clock
Example: To set the clock to 2:30 p.m. on
August 25 (summer time) 2001.
1 Press PROG..
The MENU screen appears on the TV.
2 Select “PRESET” using FF or REW,
and press ENTER.
3 Press ENTER to select “CLOCK SET”.
4 Select “AUTO” or “MANU” using PLAY or
STOP.
AUTO : The VCR automatically sets or
adjusts the clock.
If you select “AUTO” mode, proceed to step 8.
MANU : You can set the clock manually.
If you select “MANU” mode, proceed to next
step.
5 Vary the digits to set the hour.
PLAY : To increase.
STOP : To decrease.
6 Move to the next using FF
(To move back, press REW .)
7 Repeat step 5 and 6 to set the minutes,
month, day, and the year (by the last
two digits).
Proceed to step 10 to start the clock.
E n D : PROG ENTER
CLOCK SET
SUMMER TIME
TIME ZO n E CH
2
SCA nn I n G n OW
E n D : PROG ENTER
CLOCK SET
SUMMER TIME
TIME ZO n E CH
P R E S S E n T E R
T O S T A R T S E T T I n G
E n D : PROG ENTER
CLOCK SET
CH MEMORY
W-412 (ENG)* 1/17/01, 9:50 AM 15