Targus USB-2.0 Mobile - Manual (Page 4)

4
Connecting Devices to the Mini Hub
To connect a USB device, plug it into a USB port on the mini
hub and follow any additional instructions provided with the
device.
When connecting new devices to the mini hub, consider the
following guidelines:
• If your computer is running the Windows ® 98 operating
system, a series of screens appear, beginning with the Add
New Hardware Wizard, to guide you through the driver
installation process.
• If your computer is running the Windows ® Millennium
Edition, Windows ® 2000 or Windows ® XP operating
system, the device drivers may install automatically.
• When connecting a new device to the mini hub, you must
run the Setup or Install program for that device.
• When connecting a device to the mini hub, to avoid possible
damage, never force the cable connector into the port on the
mini hub. If the cable connector does not attach smoothly,
remove the connector, turn it over and try attaching it again.