Technicolor - Thomson ITC251 - Manual (Page 17)

Advanced functions
EN
17
Picture in picture (PIP)
Press the MENU button to display the OVERVIEW menu. Select Picture in Picture
and press OK .The menu displays. Under the Display mode option, select one of the
following PIP display modes:
- Off : PIP is disabled.
- Single : a channel or av programme is displayed in a frame in a corner of the screen.
- Split screen : the screen is divided vertically in two and the PIP is displayed on the
right side. Sound comes from the main programme, on the left.
When you enable the PIP function, the other options in the menu are displayed.
- In Single mode, you can select the programme, the zoom and the position of the frame
on the screen. Select an option from the list each time using the buttons.
- In Split screen mode, you can select the programmes to be displayed in both pictures.
Use the PR +/ PR - buttons to change programmes on the left side of the screen and use
the PIP +/ PIP - buttons to change programmes on the right side of the screen. Use the
SWAP button to swap pictures.
Press EXIT to close the menu. Select the option Return and press OK to return to the
OVERVIEW menu.
Operation (TV mode)
Use the PIP button on the remote control to enable the different display modes in
turn.
In both display modes:
- Use the SWAP button to swap the channels around.
- Press the FREEZE button to freeze the main picture.
- To apply the PIP function to an AV programme in RGB, you need to select RGB as
the relevant AV source in the AV Settings menu (see page 19).
In Single mode:
- Use the PIP ZOOM button to change the size of the PIP picture.
In Split screen mode:
- Use the PIP +/ PIP - buttons to change programmes on the right side of the screen.
Return
Display mode PIP...
Programme 01
❿ ❿ Zoom Minimum...
Position Upper right...
PIP
Return
Display mode Split screen...
❿ ❿ Programme 01
PIP
itc251-en 2/02/06 11:42 Page 17