Tricity Bendix L55M2 - Manual (Page 11)

11
NOTE: Taptite screws are used to secure
the handle. These are thread forming
screws and sufficient pressure must be
applied to allow the screws to produce a
thread in the plunged holes.
The grill pan is designed so that you can pull
it forward but it will stay supported. To
remove the pan push it back as far as
possible and lift it off. Replace it in reverse
order.
Place the grill pan on the shelf so that the
pan is positioned centrally beneath the grill.
Hints and tips
• Most foods should be placed on the grid
in the grill pan to allow maximum
circulation of air to lift the food out of the
fats and juices.
• Adjust the grid and grill position to allow
for different thicknesses of food.
• Food should be thoroughly dried before
grilling to minimise splashing. Brush
lean meats and fish lightly with a little oil
or melted butter to keep them moist
during cooking.
• Accompaniments such as tomatoes and
mushrooms may be placed underneath
the grid when grilling meats.
• When toasting bread, use the grid in the
high position.
• Preheat the grill on a full setting for a few
minutes before sealing steaks or
toasting. Adjust the heat setting as
necessary during cooking.
• The food should be turned over during
cooking as required.