Topcom BUTLER 3100 - Manual (Page 8)

8 Topcom Butler 3100
ENGLISH
5.5 CALLING A MEMORY NUMBER
• Press the Memory button , followed by the number of the memory location (0-9).
• Press the Line button . The memory number will be dialled automatically.
• Press the Line button when you want to terminate the call.
5.6 MUTE FUNCTION
It is possible to deactivate the microphone during a conversation. Now you can speak openly without being heard by
your correspondent.
•
Press the Mute button during a conversation. The microphone will be deactivated. The MUTE symbol
appears on the display.
• Press the Mute button again when you want to continue the conversation.
5.7 SETTING THE VOLUME
During a conversation you can set the volume by pressing the Volume button . You can set the volume alternatively
in Hi, Medium and Low.
5.8 PAGING
When you press the Paging button on the base unit, the handset emits a ringing signal for 30 seconds. This signal
helps you find a lost handset. Press any key to stop the ringing on a handset.
5.9 OUT OF RANGE WARNING
When the handset is out of the working range of the base unit during a conversation, the unit will emit a warning signal
to warn the user that he has to move closer towards the base unit.
5.10 FLASH BUTTON (R)
When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms or 250 ms). It
gives you the possibility to use the special services of your telephone provider and/or to transfer calls when you have
a telephone exchange.
5.10.1 Setting the Flash time
•
Press and hold the programming button until these 3 icons appears on the display
• Press ‘3’. Only appears on the display
• Press ‘1’ for 100ms or ‘2’ for 250ms flash time
• Press again to confirm the setting
5.11 SETTING THE RING VOLUME AND MELODY
5.11.1 Handset ring volume and melody
• Press and hold the programming button until these 3 icons appears on the display
• Press ‘1’. Only appears on the display
• Press 1 to 5 to select the melody. The melody will be played ones.
• Press the volume key repeatedly to adjust the ringer volume
• Press again to confirm the setting
Remark: You can turn the ringer volume of each individual handset ON or OFF by simply press and hold
the
key in standby.
5.11.2 Base volume
You can set the volume high, low or Off:
•
Press and hold the paging key
• One ring will be played to hear the volume. Press and hold the paging key again to select another volume.
• If you hear two beeps, the ringer is turned off.
R
R
R
B3100.book Page 8 Thursday, May 8, 2003 3:51 PM