Toshiba SATELLITE A10 - Manual (Page 89)

89 Learning the Basics
Using the DVD-ROM or Multifunction drive
5.375 x 8.375 ver 2.3
4 Carefully place the disc in the empty tray with its label
facing up.
Inserting a disc
Be careful not to touch the drive’s lens (located underneath the
drive’s spindle) or the area around it. Doing so could cause the
drive to malfunction.
5 Gently press the center of the disc onto the spindle until it
locks into place.
Positioning the disc on the spindle
Make sure the disc is properly positioned on the spindle. If
you position the disc incorrectly, it can jam the disc tray.
Disc
Spindle
Correct position
Incorrect position
Incorrect position