TANDBERG T1 - Manual (Page 20)

D14224.03 USER GUIDE TANDBERG T1—NOVEMBER 2008
20
What’s in this guide? Getting started Making calls Using the phone book In-call features Video conferencing Video conferencing In-call features
Where to find it:
BestView—Face recognition
The TANDBERG T1 is capable of doing face recognition.
The face recognition system aims to search for faces in order to optimize
the picture frame, and is therefore called BestView. Once a face or group of
faces has been detected camera zoom and camera angle will be changed
accordingly to obtain an optimal representation on the screen.
Kindly observe the following:
• The Best view feature is still a preview feature.
• The Best view optimization process may take up to 5 seconds.
• The detection of faces works better when people look towards the camera.
• The area from the eyebrows down to just below the lips should be
uncovered.
• Beard is normally not a problem.
Using Best view
1. Press the key on the remote control to display the Layout menu.
Select Selfview to be shown as required
2. Press the key on the remote control to display the Home menu and
select Camera control
3. In the Camera control menu, locate the Best view button at the bottom of
the screen
4. Press the corresponding Function key on the remote control to start the
Best view optimization process. Look towards the camera for about five
seconds
5. The system will now look for faces and adjust the zoom and camera angle
to obtain a best fit.
Best view (beta) Exit
The Best view feature
is found in the Camera
control menu
Use this
softkey to exit
Best view