Reference section, Troubleshooting, Symptom and solution – Toshiba VX1A00054000 User Manual

Page 34

Advertising
background image

Toshiba 5257Z3500A(E)

34

Reference section

Troubleshooting

Before calling a service technician, please check the following
table for a possible cause of the symptom and some solutions.

Symptom and solution

TV will not turn on

• Make sure the power cord is plugged in, then press

!

and

1.

• The remote control batteries may be dead. Replace the

batteries.

No picture, no sound

• Check the antenna connections.

No sound, picture OK

• The sound may be muted. Press

Y, y or

U.

• The station may have broadcast difficulties. Try another

channel.

• Check that the

Speaker function in SOUND menu is

properly set.

Poor sound, picture OK

• The station may have broadcast difficulties. Try another

channel.

Poor picture, sound OK

• Check the antenna connections.
• The station may have broadcast difficulties. Try another

channel.

• Adjust the

PICTURE menu.

Poor reception of broadcast channels

• Check the antenna connections.
• The station may have broadcast difficulties. Try another

channel.

• Make sure the Color system is properly set.

Teletext problems

• Check the antenna connections.

Good performance of text depends on a good strong
broadcast signal.

Some pixels of the screen do not light up

• The LCD display panel is manufactured using an

extremely high level of precision technology, however,
sometimes some pixels of the screen may be missing
picture elements or have luminous spots. This is not a sign
of a malfunction.

The brightness of the screen comes down, or flickers

of the screen are caused, or some parts of the screen

do not light up.

• When you just buy and start to use this TV, a flickering

may be caused in the screen. In this case, switch off the
TV, then switch on it again to cure the condition.

• The cold cathode fluorescent lamp used for the back light

on this TV has longevity. When the brightness of the
screen comes down, or the flickers of the screen are
caused, or some parts of the screen do not light up, it may
reach the end of its life. Contact a service technician.

The picture brightness varies when you display

switch the TV on.

• If you switch the TV on at 0°C and under, wait until the

warms up.

Multiple images

• The station may have broadcast difficulties. Try another

channel.

• Antenna reception may be poor. Use a high directional

outdoor antenna.

• Check if the direction of the antenna has changed.

Poor color or no color

• The station may have broadcast difficulties. Try another

channel.

• Adjust the

Tint and/or Color in the PICTURE menu.

The remote control does not operate

• Remove all obstructions between the remote control and

the remote control sensor on the TV.

• The remote control batteries may be dead. Replace the

batteries.

• Check that the TV /REGZA-LINK/DVD switch on the

remote control is properly set.

No REGZA-LINK operation

• Depending on the connected REGZA-LINK compatible

devices, not all the REGZA-LINK feature is available.

• Make sure the HDMI cables with HDMI logo are used.
• When the connected REGZA-LINK device does not work

correctly after you have changed setting of the device, turn
off your TV and unplug the power cord, then plug and turn
on again.

• If several devices are connected, REGZA-LINK feature

may not operate properly.

• Read the owner’s manual furnished with the connected

REGZA-LINK device.

HDMI problems

• For HDMI cables

Make sure the HDMI cables with the HDMI Logo
(

) are used.

• For HDMI Deep Color

TM

You should need to use Category 2 cable to work
properly. Normal HDMI cable or DVI cable may not work
with this option.

• For Legacy HDMI source

Some of legacy HDMI sources may not work properly
with latest HDMI TV products, due to new standard
adoption. Please try to set Off the HDMI settings
(

Lip Sync, Deep Color, xvYCC). Your legacy HDMI

source should operate properly with this TV products.

5257Z3500.book Page 34 Wednesday, October 24, 2007 6:34 PM

Advertising