Toshiba Extended Panel TOS-SN-1 - Manual (Page 2)

TOS-SN-1
Γ
For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192
Connect the Extended Panel to the inverter according to the procedure mentioned below.
1. Wait 10 minutes after the S11 is turned off to insure the drive is denergized. The
charge lamp can be used as a secondary indicator to determine if the drive is still
charged.
2. Connect the communication connectors of the extended panel to the inverter (CN1),
which has the common serial option (communication) connector, with the optional
cable.
3. Insure a secure connection is made between the inverter and the extended panel
once the connection is made.
4. Power on the inverter after connection has been made, and the display should turn
on.
Note: Before removing the cable, insure step 1 is confirmed.
Programming
Parameter Description Default Value New Value
cmod Command mode selection
1
Operational Panel
1
Operational Panel
fmod Frequency setting mode selection 1
0
Built-in Potentiometer
3
Operational Panel