Texas Memory Systems RamSan-500 - Manual (Page 16)

RamSan-500 User’s Manual 16 of 48
menu and choose the “Identify
Module” option.
Identify Module
Module 1
Next, scroll down the Identify
Module sub-menu to choose
the module that you wish to
Identify. After a Module is
selected it Status Indicator LED
will slowly blink Orange for four
second and then return to its
previous state.
Once the appropriate module has been identified it may be powered
off from the front panel.
Main Menu
Flash Modules
To power off a particular
module, use the arrow buttons
to cycle through the top-level
menu to select “Flash
Modules”. Use the Select
button to select this menu
item.
Flash Modules
Power off Module
To choose a particular Flash
module to power off, scroll
through the Flash Module sub-
menu and choose the “Power
Off Module” option.
Power Off Module
Module 1
Next, scroll down the Power Off
Module sub-menu to choose
the module that you wish to
power off.
Power Off Module 1?
↓ Yes ↑ No The display prompts you to
confirm that you wish to power
off the module. To cancel the
module power off, use the ↑
↑ ↑ ↑
button to return to the main
menu. To proceed with the
module power off, use the ↓
↓ ↓ ↓
button to confirm.
Flash Module Menu
Exit
You can then exit from the
Flash Module sub-menu and
remove the chosen module.